MIPI CSI Camera Guide Board for Information Point, WF-G3399, AndroidSBC, Malmo

TL;DR: MIPI CSI Camera Guide Board for Information Point

AndroidSBC peripheral desk: guide kiosk touch, scanner and printer driver SDK declared production-ready serving Malmo, Sweden. The WF-G3399 smart guide kiosk Android motherboard spans the dual-screen high-definition guide kiosk and eleven sister models in the WF-G series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 64-bit SoC with the ARM Mali-T860 MP4 GPU, dual HDMI 2.0 4K output plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Malmo and Sweden importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The WF-G smart guide kiosk Android motherboard family spans venue types rather than a single product category. AndroidSBC supplies the same twelve-model family into shopping centre floor directories, tenant and product finders, supermarket price check points, pharmacy enquiry counters, airport and transit wayfinding banks, hospital and clinic orientation points, hotel and resort lobby guides, museum and exhibition interpretive displays, campus and university directories, government building service points, casino and stadium concourse guides and outdoor smart city information pillars. Malmo integrators typically start with one venue type, prove the content stack, then reuse the board on the next site. Sweden distributors buy the family as a catalogue and configure per client instead of re-qualifying a new board for every tender. For Sweden importers the working rhythm in Malmo is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-G3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3399 (dual-screen high-definition guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-G family, the WF-G3399-A variant is the typical configuration for the hotel lobby and resort directory terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Sweden Buyers

The fourth obstacle is unattended reliability. A directory screen that runs from mall open to mall close, seven days a week, exposes thermal, power and storage weaknesses that a bench test in Malmo will never show.

The compliance dossier is assembled before the boards move. For Sweden AndroidSBC bundles PTS conformity and CE marking with PTS radio interface notification into the same carton that clears Port of Stockholm, which is the difference between a Malmo programme that installs on arrival and one that waits on paperwork. As of September 18, 2026, 62300 boards are allocated to Malmo and Sweden, the 2nd allocation this cycle, moving on the Stockholm - Shanghai lane.

Competitive Comparison: WF-G3399 vs Competing Smart Guide Kiosk Android Boards

The competitive set for a smart guide kiosk board is wide, from single-chip vendor boards to full industrial computer modules. What separates them for Malmo buyers in Sweden is whether the vendor can cover an entry price-check screen and a multi-screen AI advisory wall from one firmware baseline.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Labour economics keep pushing the same direction. With information desks under staffing pressure in Sweden, venue operators in Malmo are converting more of the orientation moment to self-service: floor directories, tenant finders, route planners, exhibit guides and appointment check-in points. Each conversion is another dual-screen high-definition guide kiosk board, and each one has to be managed as part of a fleet rather than as a standalone screen.

• Mall floor directories and tenant finders: WF-G3399 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1331 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G1331 and the industrial WF-G6180 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G6180 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

The gap between a market forecast and a Malmo order book is the board count per venue type, and AndroidSBC publishes the per-venue assumptions it uses for Sweden so integrators can sanity-check their own numbers.

Partner Success Story: Andes Centro Digital (shopping centre technology integrator)

The Andes Centro Digital rollout in the Latin America commercial property segment shows how the WF-G family from AndroidSBC supports Malmo integrators. Andes Centro Digital refreshed 62300 WF-G entry-tier boards across shopping centre directory and promotional screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Andes Centro Digital branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.

According to Andes Centro Digital Technology Manager for Latin America Commercial Property: Andes Centro Digital kept a mall estate on one 22nm entry tier and moved 62300 directory screens to the WF-G board, which let Malmo centres in Sweden keep the same Android image as the previous generation.

Field Report: lobby directory terminal installation at a business hotel group

SHENZHEN, September 18, 2026 - Liang Shu, AndroidSBC field desk. A mains-cut test was run mid-burn-in: power was removed for 30 seconds and the WF-G3399 boards returned to the dual-screen high-definition guide kiosk directory home screen without operator input. The WF-G3399 smart guide kiosk Android motherboard order for Malmo, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.

The WF-G3399 dual-screen high-definition guide kiosk production lot includes the WF-G3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, SHENZHEN. Sweden integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3399 Application Scenarios

The WF-G3399 dual-screen high-definition guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3399-A configuration is the typical build for the hotel lobby and resort directory terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3399 plus WF-G5270 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G8800 plus WF-G3399 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G8801 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G3600 plus WF-G5270 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G8800 plus WF-G3600 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G5270 plus WF-G8801 carry the guest orientation flow in Malmo.
• Exhibition and museum interpretive display points: WF-G3399 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G3600 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Malmo: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Malmo Buyers

AndroidSBC structures the WF-G guide kiosk programme around three partner tracks for Malmo and Sweden, each with a different entry quantity and a different level of design control.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Malmo, which is common when a distributor wins a tender that turns into a private-label line for Sweden.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen high-definition guide kiosk?

Answer: Yes. The dual-screen high-definition guide kiosk is stock on the WF-G smart guide kiosk Android motherboard family from AndroidSBC. All tiers are validated against the same firmware build and the same content management interface before shipment to Malmo.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-G family?

Answer: RK3399 is one rung on an eight-step ladder. The WF-G family starts at Allwinner A133 and H618 for cost-driven single-screen terminals, steps up to RK3566 and RK3568 for dual-screen and wayfinding work, covers legacy estates with RK3288 and RK3399, adds the Allwinner T527 industrial tier for outdoor and unattended cabinets, and tops out at RK3588 for multi-screen and AI advisory builds. AndroidSBC keeps all eight on one Android baseline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Sweden?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork as part of the source-factory shipment: CE, FCC, UKCA, RoHS, REACH and the PTS registration with CE marking with PTS radio interface notification that Sweden customs asks for.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC quotes the WF-G family from one sample board with no minimum programme commitment. OEM private label opens at 100 pieces, ODM at 500 pieces, and the mass-production window is 15-30 days after BOM sign-off for Sweden shipments.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC builds custom Android ROM and custom Linux images on the WF-G family: AOSP builds, custom boot animation, pre-installed applications, kiosk-mode lockdown, custom UI and a private SDK module, all held on the same seven-year firmware window.

How are software updates and long-term support handled on the WF-G family?

Answer: The update model is wave-based. A Malmo venue group can nominate a pilot site, hold the rest of the estate on the previous build, and only release the next wave once the pilot is clean. Rollback is built into the update client on every WF-G tier.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Delivery to Amazon FBA or a 3PL consolidation point is a standard option on the WF-G family, quoted on FOB Shenzhen, CIF Port of Stockholm or DDP terms for Malmo and Sweden partners.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes, and the replacement stock is held on the same tiers as the original order. A Malmo partner reports a DOA unit with evidence, AndroidSBC ships a replacement from buffer stock, and the failed board is analysed at the Longgang line rather than scrapped.

Contact AndroidSBC: Start Your WF-G3399 Sourcing Conversation

Malmo integrators can reach the AndroidSBC export desk for the WF-G smart guide kiosk Android motherboard family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Sweden buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-G family.