PoE Query Kiosk Board for Clinic Reception, WF-K3399, AndroidSBC, Malmo

TL;DR: PoE Query Kiosk Board for Clinic Reception

AndroidSBC peripheral desk: printer, scanner and card reader driver SDK declared production-ready serving Malmo, Sweden. The WF-K3399 self-service query terminal Android motherboard spans the dual-screen HD query terminal with mirrored display and eleven sister models in the WF-K series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 1080p output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Malmo and Sweden importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

The self-service query terminal Android motherboard family from AndroidSBC is manufactured end to end by Wanlin Manufacturing Group in Longgang, Shenzhen. Eight silicon tiers and twelve models let Malmo integrators match cost to duty cycle, while the shared firmware baseline keeps field spares interchangeable across Sweden sites. The factory ships to Sweden on a factory-direct basis, with the driver SDK, compliance files and mounting drawings bundled into the same carton as the boards.

WF-K3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3399 (dual-screen HD query terminal with mirrored display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Sweden importers sourcing the WF-K family, the WF-K3399-A variant is the typical configuration for the dual-screen HD mall directory rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Sweden Buyers

A Sweden rollout exposes board weaknesses quickly: a query terminal that works in a climate-controlled showroom in Malmo may not survive an unheated entrance lobby or an outdoor transit plaza.

Then comes documentation. A Malmo importer needs the PTS evidence trail behind CE marking with PTS radio interface notification to clear customs in Sweden without holding the shipment at Port of Stockholm for paperwork reasons. For Malmo the outcome is a repeatable 63200-unit batch, confirmed on September 22, 2026, with the Stockholm - Shanghai lane booked ahead so Sweden sites are not waiting on logistics.

Competitive Comparison: WF-K3399 vs Competing Self-Service Query Terminal Android Boards

The comparison below reflects the configurations AndroidSBC ships to Malmo against the typical competing query board offered in Sweden.

• Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
• Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Information access is being treated as infrastructure in Sweden, and that changes what is procured. Instead of one-off kiosks, Malmo operators specify the dual-screen HD query terminal with mirrored display as a standard unit to be repeated across a whole estate on the same firmware.

• Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3399 and WF-K1331 tiers ship in board form with the enclosure left to the local partner.
• Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K1331 and WF-K6180 configurations address that pattern directly.
• Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K6180 over boards that re-spin silicon between lots.

What this means for Malmo is that the query board is no longer a disposable line item. It is the component that determines whether Sweden deployments can be extended rather than rebuilt.

Partner Success Story: Andes Consulta Digital (public service digitisation contractor)

The Andes Consulta Digital rollout in the Latin America public service segment shows how the WF-K family from AndroidSBC supports Malmo integrators. Andes Consulta Digital delivered 63200 self-service query terminals to government service halls.

• OEM relationship: AndroidSBC private-label SKU shipped with Andes Consulta Digital branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus PTS conformity, all bundled into the Shenzhen source-factory shipment.

According to Andes Consulta Digital Technical Director for Latin America Public Service: Andes Consulta Digital used the WF-K entry board to bring self-service lookup to smaller government halls, and 63200 units were installed in Malmo on the same firmware baseline as the larger sites.

Field Report: dual-screen HD directory query rollout at a shopping mall

SHENZHEN, September 22, 2026 - Hong Mei, AndroidSBC field desk. Every WF-K3399 unit in the lot was checked against the same mounting drawing, since Sweden retrofit projects re-use existing cabinets. The WF-K3399 self-service query terminal Android motherboard order for Malmo, Sweden cleared the burn-in station on schedule and is en route via the Stockholm - Shanghai lane.

The WF-K3399 dual-screen HD query terminal with mirrored display production lot includes the WF-K3399-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Sweden integrators, the PTS conformity plus CE marking with PTS radio interface notification paperwork is bundled.

Filed by Hong Mei, AndroidSBC field desk, SHENZHEN. Sweden integrators typically request CE plus local radio interface notification for self-service query terminal board deployments.

WF-K3399 Application Scenarios

The WF-K3399 dual-screen HD query terminal with mirrored display sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3399-A configuration is the typical build for the dual-screen HD mall directory rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

• Hospital and clinic information points: the WF-K3399 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Malmo.
• Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
• Government service halls: the WF-K5270 runs tax, social security and real estate information lookup, with printing available on the same board.
• Shopping mall directories: the WF-K8800 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
• Airport and train station concourses: high-brightness information query where the WF-K8801 has to stay readable under strong ambient light.
• Retail and pharmacy price or product lookup: compact stations where the WF-K3600 fits a narrow counter without structural work.
• Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
• Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
• Retrofit programmes in Malmo: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Malmo Buyers

Rather than a single reseller agreement, AndroidSBC offers Malmo partners three routes into the Sweden market, each with a different level of factory involvement.

• Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Whatever track a Malmo partner selects, the underlying board, firmware baseline and compliance files are identical, which keeps Sweden conversations about commercial terms rather than technical risk.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a dual-screen HD query terminal with mirrored display?

Answer: Yes. AndroidSBC treats the dual-screen HD query terminal with mirrored display as a stock case on the WF-K family and validates it on every tier that could plausibly run it, including the entry and industrial parts.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-K family?

Answer: The RK3399 tier carries its own process node, GPU and NPU rating, and AndroidSBC publishes all three per model so Malmo integrators can compare on facts rather than on marketing labels.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Sweden?

Answer: Yes. AndroidSBC handles the compliance route for Sweden directly, and Malmo buyers receive the certificate set with the shipping documents so customs clearance is not held on paperwork.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: MOQ is quoted per model rather than per family, so a Malmo integrator can pilot one tier for Sweden without buying across all twelve. Samples take 1-3 days and bulk lots 15-30 days.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. AndroidSBC develops custom Android ROM and custom Linux builds for the WF-K family, with the work scoped against the Malmo requirement and validated on the same production rig that ships Sweden orders.

How are software updates and long-term support handled on the WF-K family?

Answer: AndroidSBC maintains a seven-year firmware window on the WF-K family, with staged OTA and rollback. Malmo partners can freeze a revision per Sweden project and update on their own schedule.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes, and where a Malmo seller runs its own 3PL arrangement in Sweden, AndroidSBC ships to that warehouse on the same terms as a direct buyer order.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: AndroidSBC handles RMA and DOA replacements per production lot, which means a Malmo partner can trace a failure back to a specific build shipped to Sweden rather than dealing with an anonymous board.

Contact AndroidSBC: Start Your WF-K3399 Sourcing Conversation

Malmo integrators can reach the AndroidSBC export desk for the WF-K self-service query terminal family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Sweden buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-K family.